Campaña de la Memoria Académica Anual del IITCurso 2023 - 2024 - Versión en Inglés
A continuación se muestra la información disponible de Dr.D.Romano Giannetti en el peridodo de tiempo desde el 1 de septiembre de 2023 hasta el 31 de agosto de 2024. Esta información se va a emplear para elaborar la Memoria Académica Anual del IIT, la Memoria de Investigación de Comillas y tu Curriculum Vitae, por lo que es muy importante que sea correcta y esté completa. Todos los campos que se muestran en cada referencia deben tener información, a menos que se indique lo contrario (p.ej. "No aplica"). Por favor, complétala. Comprueba también que la información se muestra en el apartado correcto. Si detectas cualquier error o falta de información, por favor, envía un email pinchando aquí indicando el apartado y la información errónea o faltante. Para enviar comentarios/sugerencias/errores... sobre esta página web, por favor haz clic aquí. Para ver la Versión en Español, haz clic aquí. Para ver la Versión Completa de la memoria, haz clic aquí.
[Expandir todo | Contraer todo] Chapter 1. Organizational structure [ | ]- 1.1 Management
- 1.2 Council
- 1.3 Area coordinators
- 1.4 Scientific advisory board
- 1.5 Academic staff
- 1.6 Associated academic staff
* | Name: | Romano Giannetti | | Category: | Professor | | Degree: | Ph.D. in Electronics and Computing Engineering (University of Padua, Italy)
Electronics Engineer (University of Pisa, Italy) | | Areas of Interest: | Measurement instrumentation and methodology. Biomedical instrumentation. Noise measurements. | | ICAI Department: | DEAC | | | |
- 1.7 Pre- and postdoctoral fellows
- 1.8 Areas of Research
- 1.8.1 MAC Coordinator
- 1.8.2 REDES Coordinator
- 1.8.3 RYE Coordinator
- 1.8.4 SADSE Coordinator
- 1.8.5 PCI Coordinator
- 1.8.6 ASF Coordinator
- 1.8.7 ASI Coordinator
- 1.8.8 BIO Coordinator
- 1.8.9 SMS Coordinator
- 1.9 Services staff
- 1.9.1 Systems Administrator Staff
- 1.9.2 Administrative Staff
Chapter 2. Research [ | ]- 2.1 Research Projects
- 2.1.1 Research and develop projects
- 2.1.1.1 Private funding
* | Abbreviated name: | PROPIO2021_SENSCAFFOLD | | Project title: | Experimental proof-of.concept of electromagnetic selfsensing scaffolds | | Funding entity: | Universidad Pontificia Comillas | | Start date: | September 2021 | | End date: | December 2023 | | Researcher(s): | Francisco Javier Herraiz Martínez, Javier Matanza Domingo, Yolanda Ballesteros Iglesias, Juan Carlos del Real Romero, Romano Giannetti, José Daniel Muñoz Frías, Miguel Monteagudo Honrubia | | Description: | The main objective of the project is the development of a novel scaffolds technology. These scaffolds are resonant in the GHz band. Thus, they can be interrogated by an electromagnetic signal and used as sensors. Their response signal will be used to control the regeneration of the bone. Moreover, it could be useful for infections detectecion. In order to obtain such an ambitious goal, different novel technologies will be used. In partircular, additive manufacturing techniques and nanomaterials are proposed. Finally, a demonstrator of the whole system will be develop to evaluate the viability of the proposed technology. | | | | * | Abbreviated name: | IMPLANTSEN3D | | Project title: | Self-sensing implants based on additive manufacturing techniques | | Funding entity: | Universidad Pontificia Comillas | | Start date: | September 2023 | | End date: | December 2024 | | Researcher(s): | Eva Paz Jiménez, Francisco Javier Herraiz Martínez, Paraskevas Sofokleous, Javier Matanza Domingo, Sara López de Armentia Hernández, Yolanda Ballesteros Iglesias, Romano Giannetti | | Description: | The objective of this project is the manufacture of self-sensing implants for biomedical applications through 3D printing using filaments reinforced with ceramic particles. The development of functional materials that can provide particular properties beyond the mere structural support (biological, chemical, electromagnetic properties,...) has been enormous in recent years. In this project, it is intended to use polymeric filaments (PLA-based) for 3D printing by fused filament deposition (FDM), loaded with zirconia and hydroxyapatite ceramic particles. These particles give the polymer a high dielectric permittivity and high biocompatibility, which makes them ideal candidates for the design of electromagnetic sensors in the biomedical field. | | | | * | Abbreviated name: | Dolphin_Attack | | Project title: | Detection, recording, and inhibition system for ultrasound-based attacks on smart devices | | Funding entity: | TRC Informática, S.L. | | Start date: | December 2023 | | End date: | July 2024 | | Researcher(s): | Javier Matanza Domingo, Eduardo Alonso Rivas, Romano Giannetti | | Description: | The project addresses the detection and inhibition of ultrasound signals used in attacks on mobile devices (known as the Dolphin Attack). The goal is to implement a system for detecting this attack and inhibiting it through an interfering signal. | | | |
- 2.1.1.2 Public funding
* | Abbreviated name: | MYORTESIS | | Project title: | Myoelectric orthoses with implantable electrodes: optimization of bionic reconstruction | | Funding entity: | Instituto de Salud Carlos III | | Start date: | January 2023 | | End date: | December 2025 | | Researcher(s): | Romano Giannetti, José Daniel Muñoz Frías | | Description: | Peripheral nerve injuries manifest themselves as loss of motor function and loss of sensitivity, which can be very disabling for the patient. Despite the progress made in recent years in reconstructive surgery, the results do not always allow a functional limb. Therefore, myoelectric orthoses (exoskeletons) have been developed to improve the function of the affected limb (also known as bionic reconstruction). Current models are composed of sensors on the skin to communicate muscle contraction to the orthosis, often with a weak and unstable signal for various reasons (movement, sweat, etc.). In addition, the high cost of these orthoses makes it impossible to use them in national health systems such as the one in our country.
The objective of our project is to improve human-machine communication sensors. To this end, we propose four phases: 1. modification of the current electromyography sensors; 2. encapsulation of the sensor with 3D printing with autologous cells; 3. implantation of these sensors in an animal model; 4. pilot study in patients with these lesions with no other therapeutic alternative. Finally, we propose the development and 3D printing of these orthoses in order to reduce their price.
Translated with www.DeepL.com/Translator (free version) | | | |
- 2.1.2 Consultancy and technological support
- 2.1.2.1 Private funding
- 2.1.2.2 Public funding
- 2.1.3 Services and analysis projects
- 2.1.3.1 Private funding
- 2.1.3.2 Public funding
- 2.2 Publications
- 2.2.1 Books
- 2.2.2 Chapters in books
- 2.2.3 Papers in Journals
* | Author(s): | J. González-Prieto, L. Cristóbal, M. Arenillas, R. Giannetti, J.D. Muñoz Frías, E. Alonso, E. Sanz Barbero, A. Gutiérrez-Pecharromán, F. Díaz Montero, A.A. Maldonado | | Title: | Regenerative Peripheral Nerve Interfaces (RPNIs) in animal models and their applications: a systematic review | | Journal: | International Journal of Molecular Sciences | | Vol & Num: | vol. 25, nº. 2 | | Pages: | 1141-1-1141-18 | | ISSN: | 1661-6596 | | Publication date: | January 2024/January 2024 | | | | * | Author(s): | M. Monteagudo Honrubia, G. Caposciutti, F.J. Herraiz-Martínez, J. Matanza, B. Tellini, R. Giannetti | | Title: | Measuring sedimentation profiles for nanoparticle characterization through a square spiral resonator sensor | | Journal: | Sensors | | Vol & Num: | vol. 24, nº. 9 | | Pages: | 2735-1-2735-14 | | ISSN: | 1424-8220 | | Publication date: | April 2024/May 2024 | | | |
- 2.2.4 Papers in Congress
* | Author(s): | J. González-Prieto, M. Arenillas, E. Sanz Barbero, A. Gutiérrez-Pecharromán, M.F. Alarcón, F. Díaz Montero, J. Cortés, J.D. Muñoz Frías, R. Giannetti, L. Cristóbal, A.A. Maldonado | | Title: | El uso de interfaces regenerativas de nervio periférico (RPNI) en modelos animales y sus aplicaciones: una revisión sistemática | | Type: | Poster | | Congress: | 55º Congreso Nacional de la SECPRE - SECPRE | | City: | Valencia | | Country: | Spain | | Date: | 04-06 October 2023 | | ISBN: | | | | | * | Author(s): | M. Sáenz, R. Giannetti, J.D. Muñoz Frías, N. Pérez Mallada | | Title: | Buenas prácticas en la toma de temperatura en pacientes: VERSICON (VERificación metrológica de termómetros clínicos SIn CONtacto). | | Type: | Communication | | Congress: | XIV Congreso Nacional de la Sociedad Española de Electromedicina e Ingeniería Clínica - SEEIC 2024 | | City: | Toledo | | Country: | Spain | | Date: | 05-07 June 2024 | | ISBN: | | | | |
- 2.2.5 IIT Technical Documents
- 2.2.6 Other Publications
- 2.3 Software Products
Chapter 3. Teaching [ | ]- 3.1 Supervised Bachelor Theses at IIT
- 3.1.1 Bachelor's Degree in Engineering for Industrial Technologies
- 3.1.2 Bachelor's Degree in Engineering in Telecommunications Technologies
- 3.2 Postgraduate Teaching
- 3.2.1 Master Courses
- 3.2.1.1 Official Master's Degree in Industrial Engineering (MII)
- 3.2.1.2 Official Master's Degree in Telecommunications Engineering (MIT)
- 3.2.1.3 Official Master's Degree in the Electric Power Industry (MEPI)
- 3.2.1.4 Master in Railway Systems (MSF)
- 3.2.1.5 Master in Project, Construction and Maintenance of High Voltage Electrical Transmission (On-line)
- 3.2.1.6 Master in Fire Protection Engineering (MIPCI)
- 3.2.1.7 MBA in the Global Energy Industry
- 3.2.1.8 Master's Degree in Smart Industry (MIC)
- 3.2.1.9 Master’s Degree in International Industrial Project Management
- 3.2.1.10 Master in Electricity Generation. Promotion, Technology and Operation (MGE) (On-line)
- 3.2.1.11 Master's Degree in Big Data Technologies and Advanced Analytics (MBD)
- 3.2.1.12 Master's Degree in Management Solutions (MCN)
- 3.2.1.13 Master's Degree in Smart Grids (MSG)
- 3.2.1.14 Master in Biomechanics Applied to Damage Assessment; Advanced Physical Therapy Techniques
- 3.2.1.15 Master in Mobility and Safety Engineering (MMS)
- 3.2.1.16 Master in Electrical Technology (MTE)
- 3.2.1.16 Master in smart agricultural industry and sustainability
- 3.2.1.17 Official Master's Degree in Biomechanics and Sports Physiotherapy
- 3.2.2 Master Theses supervised at IIT
- 3.2.2.1 Official Master's Degree in Industrial Engineering (MII)
- 3.2.2.2 Official Master's Degree in Telecommunications Engineering (MIT)
- 3.2.2.3 Official Master's Degree in the Electric Power Industry (MEPI)
- 3.2.2.4 Erasmus Mundus International Master in Economics and Management of Network Industries (EMIN)
- 3.2.2.5 Master in Railway Systems (MSF)
- 3.2.2.6 MBA in the Global Energy Industry
- 3.2.2.7 Master in Fire Protection Engineering (MIPCI)
- 3.2.2.8 Master's Degree in Smart Industry (MIC)
- 3.2.2.9 Master’s Degree in International Industrial Project Management
- 3.2.2.10 Master's Degree in Big Data Technologies and Advanced Analytics (MBD)
- 3.2.2.11 Master in Electricity Generation. Promotion, Technology and Operation (MGE) (On-line)
- 3.2.2.12 Master's Degree in Management Solutions (MCN)
- 3.2.2.13 Master in Project, Construction and Maintenance of High Voltage Electrical Transmission (On-line)
- 3.2.2.15 Official Master's Degree in Engineering Research (MIMSI)
- 3.2.2.16 Master's Degree in Smart Grids (MSG)
- 3.2.2.17 Master in Biomechanics Applied to Damage Assessment; Advanced Physical Therapy Techniques
- 3.2.2.18 Master in Mobility and Safety Engineering (MMS)
- 3.2.2.19 Master in Electrical Technology (MTE)
- 3.2.2.20 Official Master's Degree in Biomechanics and Sports Physiotherapy
- 3.2.2.21 Master in Environment and Energy Transition
- 3.3 Other Academic Activities
- 3.3.1 External Master Courses
- 3.3.2 Supervised Master Theses in other Universities
- 3.3.3 Developed Master Theses in other Universities
Chapter 4. Doctorate [ | ]- 4.1 ICAI Engineers' Association PhD Scholarship
- 4.2 Training complements
- 4.3 Training activities
- 4.4 Doctoral Theses
- 4.4.1 Comillas Submitted Theses
- 4.4.2 Submitted Theses in other Universities
- 4.4.3 Comillas Ongoing Theses
Chapter 5. Other Activities [ | ]- 5.1 EES-UETP
- 5.2 International Exchanges
- 5.3 Visiting professors
- 5.4 Visiting students
* | Name: | Alessandro Spalletta | | Department: | Department of Energy, System, Territory, and Construction Engineering | | University: | University of Pisa | | City: | Pisa | | Country: | Italy | | Period of stay: | February 2024 | | Supervisor: | Romano Giannetti | | Otra información: | | | | | * | Name: | Alessandro Spalletta | | Department: | Department of Energy, System, Territory, and Construction Engineering | | University: | University of Pisa | | City: | Pisa | | Country: | Italy | | Period of stay: | February-July 2024 | | Supervisor: | Romano Giannetti | | Otra información: | | | | |
- 5.5 Courses offered and coordinated to external companies and institutions
- 5.6 Conferences, Seminars, Roundtables and Workshops Contributions
- 5.7 Congress, Seminars and Journals Organization
- 5.8 Other Academic Activities Organization
- 5.9 Other Activities
|